Case Study

 

College of Engineering
Mechanical and Industrial Engineering Department
Statistical Quality Control IENG 320

Statistical Quality Control

[Insert the Title (Capitalize the First Letter of Each Word)]

 

Students
1- [Insert the First Student Name and Number Here]
2- [Insert the Second Student Nameand Number Here]
3- [Insert the Third Student Nameand Number Here]
4- [Insert the Fourth Student Nameand Number Here]

Supervisor(s)
1- Dr Galal M. Abdella
2- [Insert the TA Name Here]

Spring/2018

[Insert the Title (Capitalize the First Letter of Each Word)]
1. Introduction
[Write from 15-20-15 lines introducing the following
1- Importance of Statistical Quality Control
2- The need for statistical process control tools (SPC)
3- The role of the control charts
4- Types of control charts

Note: Use the INTERNET for additional references
2. Problem or Service Introduction
[In this section describe the product or the service of the study. Define the quality characteristics of the product or the service and show the most important quality characteristics]
3. Aims and Objectives
[Add the aim and the objectives of this case study]

4.Roles and tasks description
[Describe the specific role and tasks that each student will be completing as part of this report]
5. Data Collection
[Describe the procedures followed to collect the data. Report the collection sheet in the Appendix at the end of the report. Add pictures of your product (if any)]
4. Application of Control Charts
4.1 Process Parameters Estimation
[Apply Phase I to estimate the in-control values of the corresponding quality characteristics. Use the Minitab to perform this phase].

READ ALSO :   psychology

4.2 Process Capability Analysis
[Apply the process capability analysis and describe the process situation. Use the Minitab Software]

4.3 Estimating Study Cost
[In this section, the student is required to estimate the cost of the study. Define each elements in the study and the cost associated with it]
5. Difficulties and Challenges
[Describe the difficulties and challenges of the real applications of the control charts. Provide details]
5. Conclusions and Recommendations
[Write from 5-10 lines summarizing your finding under sections 4-1, 4-2, and 4-3]
6. References
[List your references here (if any)]

 

Appendix

Sample No Observations
1 2 3 4 5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15